Description
Sennheiser ME66 K6 Microphone
The Sennheiser ME66 K6 is perfect for film and broadcast field recording with its uni-directional super-cardioids/lobar pick-up pattern. With the focus on a specific direction the sensitivity of 84db in this Sennheiser condenser microphone gives you amazing sound quality. The frequency response of 40Hz – 20 kHz in this Sennheiser professional microphone provides you with detailed, accurate signal reproduction that gives you clean and clear audio. The Sennheiser ME66 K6 is highly directional to sound sources at which it is directly pointed.
[#tab_1]
- (1) Sennheiser ME66 K6 Microphone
- (1) Avantone Shock Mount
- (1) 10′ – XLR Cable: 3-Pin Male To 3-Pin Female
- (1) 15′ – XLR Cable: 1/8″ Male To 3-Pin Female
- (1) 5/8″ Base Threaded Adapter
- (1) 1/4″ 20 To 3/8″ Adapter
- (1) 5/8″ To 3/8″ Threaded Reducer Screw
- (1) 3/8″-1/4″ Threaded Reducer Screw
- (1) Case
[/tab_1]
[#tab_2]
$20.00 Day/Weekend Rate
$60.00 Week Rate
$180.00 Month Rate
[/tab_2]
[#tab_3]
- Transducer:
Condenser
- Polar Pattern:
Supercardioid/lobar
- Frequency Response:
40 Hz to 20 kHz (± 2.5 dB)
- Maximum Input Sound Level:
125 dBA at 1 kHz (THD = 1%)
- Impedance:
Nominal: 200 Ohms (with K6)
Minimum Terminating: 1 kOhm (with K6)
- Sensitivity:
50 mV/Pa (± 2.5 dB) in free field, no load (1 kHz)
- Equivalent Noise Level:
10 dB (weighted as per DIN IEC 651)
21 dB (weighted as per CCIR 468-3)
- Power Requirements:
Supplied by K6 or K6P powering modules (available separately)
- Output Connectors:
Attaches to K6 or K6P powering module
- Pad:
None
- Low Frequency Roll-Off:
None on capsule
- Dimensions (Diam. x L):
0.9”x8.7″
- Weight:
2.3 oz
[/tab_3]
[#tab_4]
[/tab_4]
[#tab_5]
9′ Auray ABP-59B Boom Pole
Rode Blimp
Zoom H6 Handy Recorder
[/tab_5]
